1,5 Liter Set 2K Eisenglimmer Paint DB703 Anthracite Grey Extreme Resistant

Description

Send us a message
Our store
seller profile
reviews
save store
Contact
2K Iron Mica Paint DB703 Anthracite Gray Extremely Resistant
Scope of delivery:
- 1 liter of 2 components iron mica paint
- 0.25 liter hardener for iron mica paint
- 0.25 liters of dilution
Mixed yields approx. 1.25 - 1.35 liters of ready-to-use material
- 1 mixing cup for mixing
- 1 paint sieve 190my
- 1 pair of disposable gloves
This set lasts approx. 8-9m² to paint.
The micaceous iron finish is always matt,
Extremely resistant to all weather influences, acids and scratches
. Preferably used for all steel parts and aluminum parts outdoors (e.g. fences, bridges, railings and the like)
Due to the direct adhesion and rust protection on steel, aluminum and sheet steel, no further primer is required here. An epoxy primer is recommended on other substrates.
Not suitable for direct overcoating of existing paintwork - sanding/sandblasting or priming is recommended.
For spray processing we recommend a 1.5 - 1.9mm nozzle.
Use a suitable solvent-resistant roller or brush for brushing.
https://www.ebay.de/itm/165044209484
Drying times at 20°C:
Dust free: 20 minutes
Touch dry: 6 hours
Full drying: 48 hours
Oven drying at 60°C:
40 minutes
Other interesting offers
payment
Shipment
Left
Our store
seller profile
reviews
save store
Contact
Newsletter
Don't miss any more offers! We will conveniently inform you about offers and promotions by e-mail.
Subscribe to Newsletter
Contact
Send us a message
2K Iron Mica Paint DB703 Anthracite Gray Extremely Resistant Mixed yields approx. 1.25 - 1.35 liters of ready-to-use material The micaceous iron finish is always matt, Extremely resistant to all weather influences, acids and scratches. Preferably used for all steel parts and aluminum parts outdoors (e.g. fences, bridges, railings and the like) Due to the direct adhesion and rust protection on steel, aluminum and sheet steel, no further primer is required here. An epoxy primer is recommended on other substrates. Not suitable for direct overcoating of existing paintwork - sanding/sandblasting or priming is recommended.  For spray processing we recommend a 1.5 - 1.9mm nozzle. Use a suitable solvent-resistant roller or brush for brushing.  Don't miss any more offers! We will conveniently i