-40%

Eastwood Urethane Basecoat Boulevard Black 4:1 Paint 1 Gallon

$ 119.31

Availability: 49 in stock
  • Country/Region of Manufacture: United States
  • Paint Type: Urethane Base Coat
  • Modification Description: No
  • Non-Domestic Product: No
  • Modified Item: No
  • Color: Black
  • Coverage Area: 160 sq. ft.
  • UPC: 607174107025
  • HVLP Gun Fluid Tip: 1.2-1.4 mm
  • Manufacturer Color Name: Black
  • Paint Volume: 1gal.
  • Bundle Description: No
  • Mixed Ratio: 4:1
  • Select an activator: Eastwo. 4:1 Low VOC Urethane Activator Slow - 32oz
  • Manufacturer Part Number: 13566ZPA
  • Conventional Spray Pressure: 40-50 PSI
  • Conventional Siphon Fluid Tip: 1.3-1.6 mm
  • HVLP Inlet Spray Pressure: 8-10 PSI
  • Maximum Temperature: 300 Degrees
  • Condition: New
  • Custom Bundle: No
  • Brand: Eastwood
  • Conventional Gravity Fluid Tip: 1.2-1.5 mm
  • Features: 5 Sprayable Quarts and Durable Finish

    Description

    Eastwood Boulevard Black Basecoat Paint adds the superior durability of urethane to the ease of conventional basecoats.
    Apply a durable urethane finish wherever you live in the continental US, even CA
    Choose a fast, medium or slow Low-VOC Activator
    Makes 5 sprayable quarts
    Clear coat is required on basecoat paints
    Mixes 4:1 with your activator choice
    Approximate coverage: 160 SQ FT
    Max Temperature: Paint will handle up to 300 degrees without delamination, but color shift may occur, so it should not be used in a high heat setting
    Made in the USA
    Basecoat Paint Kit is a low-VOC system, so it meets regulatory limits in highly-regulated areas, eliminating the need to switch to a waterborne system.
    Specifications
    BASECOAT PAINT MIXING RATIOS
    Thoroughly mix four parts Low-VOC Urethane Basecoat with one part Low-VOC Urethane Activator. Use Fast (50308ZP) for small jobs, or temps below 75 Degree F; Medium (50309ZP) for small jobs, or temps between 70-85 degree F; or Slow (50310ZP) for large jobs, or temps above 80 Degree F. Keep in mind, other factors, such as humidity, air flow and total film thickness should also be considered. In many situations, it will be useful to add 10%-20% 50104ZP Zero-VOC Reducer to aid sprayabliity, flow and leveling. Remember, this is an activated basecoat system; only mix as much as is needed. Pot life is about 2 hours at 70 Degree F.
    PAINT GUN SET-UP
    HVLP Gun: Fluid Tip 1.2-1.4 mm Inlet Spray Pressure 8-10 psi
    Conventional Gravity: Fluid Tip 1.2-1.5 mm Inlet Spray Pressure 40-50 psi
    Conventional Siphon: Fluid Tip: 1.3-1.6 mm Inlet Spray Pressure 40-50 psi
    APPLICATION INSTRUCTIONS
    Apply Low-VOC Urethane Basecoat color in two full medium wet coats with a consistent 50% overlap pattern. Allow five to ten minutes flash time between coats. Flash time should increase if additional coats are applied. Most colors will cover in two coats.
    Basecoat should dry dust-free within 10-20 minutes. May be lightly sanded in as few as 20 minutes. Wait at least 30 minutes before wet sanding. Wait 45-90 minutes before taping on the fresh film. All dry times are approximate, at 70 degree. Temperature, air flow, total film thickness and other variable may extend these times.
    Contents
    Boulevard Black Urethane Basecoat, 1 gallon
    Low-VOC Urethane Activator, 1 qt. (your choice of Fast, Medium or Slow)
    Application Tips
    Apply A Durable Urethane Finish Wherever You Live In The Continental US, Even CA
    Safety Information
    Always wear appropriate eye, skin and respiratory protection. Consult MSDS for specific precautions and warnings .VOC = 3.5 lbs./gallon.